Welcome!

To lambrettaupgrades.co.uk

Home
News and New Products
About Us
Site Map
Brand new CNC shocks
coloured cable outers
R1 shocks (older type)
One off flywheel cowls
front dampers
Springs and bushes
gauges
Brand new R1 and R6 shock
Disc brake hoses
miscellaneous
Contact Us
Customers scooters (with
useful addresses
vespa



Your first port of call should always be 'news and new products' for updates

please note new shipping prices!
 
Brand new R1 and R6 rear shocks
 
 These are made from billet aluminium, so wont rust and come with the PRE-LOAD, COMPRESSION AND REBOUND ADJUSTERS, so can be used one-up or two-up. I put these on the softest settings but I can set them up to your requirements first if you ask. The R1 is 300mm from centre to centre, so exactly the same as a standard S3 shock. The R6 shock is 10mm shorter than the R1 and gives that little bit extra clearance between the frame and manifold, so is ideal for anyone running a reed block and big carb. on the right hand side such as a TS1, RB, Imola Etc.
 My springs are of a far superior quality to the ones on other shocks being made from hard drawn silicone chrome and are almost twice as strong as types used by others. These WILL NO SNAP, guaranteed.

 They come with your choice of 16 spring colours (see spring page) and either a 180 or 225lb spring. For an extra £25 you can have a chrome spring from Karl Russell (quality chrome, Hull).

 I only use nylon/PTFE bushes.
 
 THESE SHOCKS ARE READY TO BOLT ON!!!

shipping prices:
     
Don't forget your nyloc half-nuts and washers - on the miscellaneous page!!!
 
PRICES :
 
 R1 brand new, with 2 year guarantee..............................................................................£140.00 - None in stock, sorry.



R6 brand new, with 2 year guarantee...............................................................................£140.00 - None in stock, sorry.


 
I also have some 'nearly new' shocks with a few marks or scratches but very low mileage.
 Comes with 1 year guarantee........ £125.00      - only 1 left!


 

Product details
This is an example of a brand new R1 rear shock with a Karl Russell chromed spring and, unfortunately, brass bushes. As you can see these are made of billet aluminum, and have only done "factory" miles.  
 These are 300mm long from centre to centre and have pre-load, compression and rebound damping capabilities.
 
 
 
SITE STILL UNDER CONSTRUCTION....
 
 
 
 
 
 
 
 
 
 
 
 

 

                           WITH RED SPRING                                                                WITH BLACK SPRING

 
 
 
WITH A CAMBRIDGE BLUE SPRING.                                   RED,WHITE AND OXFORD BLUE SPRINGS
 
 
 
 
 
SUBARU BLUE
 
 
 
          WITH CHROME-LOOK SILVER                           SUBARU BLUE                                  KAWASAKI GREEN
 
 
 
BRITISH RACING GREEN ON MY LAMBRETTA
 
 
  New R6 with white spring