top of page

Top quality, made by SIP, suitable for the GP type tapered crankshaft, these will NOT fit the Li/LiS/TV and SX type, please check before buying. 

 

SIP have managed to gain the assistance of a major European producer, VAPE, to manufacture these high-end ignition systems for our beloved Lambrettas. The materials, production and construction of the SIP PERFORMANCE Lambretta ignition systems are of the highest quality. 

 

The electrical functions are representative of state of the art modern technology. Due to the eight coils included on the stator-plate enough power is created at tick-over revs to already fully illuminate the lighting. 

 

The CDI module is a 'sport' version and includes a variable ignition point which advances at low revs. This increases the available torque - especially at the lower end - and the ignition point is then gradually retarded as the rpm rises into the power-band. This also helps reduce the combustion temperature while simultaneously providing an increased rev-range.

  The 'ROAD' version with a static ignition point, similar to the original item is also available.

 These CDI's can be just swapped over with no need for extra wiring if you prefer at a later date - ALWAYS readjust and strobe your timing after changing.

 

The pick-up on the stator plate is split into two and arranged on top of another instead of next to eachother as with the original design. This eliminates the posibility of false positioning during the inital set up due to the sloppy manufacturing tolerances included on many engine casings, crankshafts, stator-plates and flywheels. The exact ignition point is clearly marked  with a precise line on both the flywheel and stator-plate, all you need to do is find out the top dead center (TDC).

IT IS ALWAYS RECOMMENDED YOU STROBE YOUR TIMING!

 

One of the most major advances achieved is the production of the fly/fanwheel unit as a single component, avoiding a rivited inner mounting cone and an uneven rotation. This greatly reduces engine vibration while also noticeably extending the working life of the flywheel side crankshaft bearing. The fanwheel is CNC machined from solid aluminium and delivers an identical volume of cooling air to the cylinder as the original throughout the whole rev-range. The amount delivered by most aftermarket ignition systems is easily surpassed by our design, without preventing higher motor speeds. 

 

The flywheel intended for the DL/GPs weighs 1650 grams, making it both considerably ligher than the original counterparts. This primarily improves throttle-response, but leaves the motor easily manageable in urban traffic and while carrying a pillion. The SIP - VAPE flywheels are 100% compatible with the original flywheel remover type.

 

Technical specifications:

 

- A relatively high 110W power is available from tick-over for greatly improved lighting.

 

- Can also power additional electric components such as a fuel pump, lambda sensor heating, USB power port etc. 

 

- Precisely balanced flywheel due to its one-piece construction.

 

- Plug and play installation without a strobe-lamp due to precise ignition point markings. 

 

- Perfectly arranged rotational mass, improved throttle-response

 

-Ideal cooling performance, identical with original type 

 

- 18-finned, CNC machined fanwheel 

 

- RPM linked variable ignition point (SIP PERFORMANCE 'sport' version) 

 

- Complete delivery includes: CDI, Fly/fanwheel, rectifier (DC)

 

- Single woodruff key slot on crankshaft mounting of the flywheel, avoiding incorrect set up.

 

- High end materials and precise production.

Lambretta Electronic kit, GP- AC VAPE Sport version, variable ignition timing

£360.00Price
Sales Tax Included
    bottom of page