The BGM PRO silent rubbers improve handling by more precise guidance of the engine in the frame. The reinforced rubbers are both different stiffness, the kickstart side being harder as it is most prone to failing.
With the reinforced BGM PRO engine silent blocks supplied and fitted as a pair, the chassis gains stability, steering precision and stiffness. The assembly is simple and is best done in the course of an engine rebuild.
MOUNTING
 
These models use factory pressed rubbers.
   Drill out the pressed rubber ends. Remove the old tube and rubbers from the housing.
   The left and right mounts are clearly marked, make sure you get them the correct way round. The engine side mount has a plastic stop ring fitted to it, do not remove it.
   Push the new BGM PRO rubbers into the casing with a little talcum powder - DO NOT USE GREASE.
 
NOTE: Mount the silent rubbers dry, do not grease/oil them. Use talcum powder for easier assembly.
 
Suitable for the following models:
PX80, PX125, PX150, Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GL150 (VLA1T), VNA, VNB, VBA, VBB